Set one rig up the way you want the whole floor to run, then publish it. Every other rig on the subscription applies it the next time SimHub starts.

Publishing

1. On the rig you have set up, open the DNR plugin and go to Enterprise, Fleet.
2. Press Publish, give the setup a name you will recognise later, and confirm.
3. That is it. The website shows the name, the version and which machine it came from, under Dashboard, Enterprise, Fleet.

Only the Enterprise owner or an administrator can publish. If the button refuses, the plugin now tells you the actual reason rather than guessing.

What travels. Colours, effects, presets and telemetry settings: your LED profiles, wheel and button box setups, ambient lighting, brows, flag boxes, all six dashboard pages and every overlay.

What deliberately does not travel

• Kiosk mode is never included. Publishing from an unlocked back office PC cannot unlock your floor.
• Which dashboards and overlays are installed on that machine, because copying it would tell a rig it already installed things it has not.
• Installed LED profiles, which are a record of what is physically written into that PC's SimHub.

Changing it. Adjust the rig and publish again. On the machine the floor is already following, the button reads Republish. The version number goes up by one each time, which is how a rig knows whether it is behind; the name is what you read.

Leaving a machine out. Any rig can tick Leave this machine out of fleet setups on the same page. It keeps its own settings and can still publish to the floor. That is for the back office PC, the workshop rig or the owner's own machine.